Foreign Voltage Detector by Telco Sales FVD good condition

This is a used

Foreign Voltage Detector 39SF Model FVD

made by Telco Sales, Inc.

FREE SHIPPING AVAILABLE IN THE U.S.

The Foreign Voltage Detector (FVD) tests for potentially hazardous
AC voltage that may be encountered by communications techni-
cians. The FVD warns technicians of hazardous voltage without
contacting the electric source.

The FVD provides visual indication of the amount of AC being
detected on a 10 step bar graph. An audible alarm will sound if the
detected AC voltage exceeds 50 volts.
The FVD replaces the 188A Test Set, but it has many more
features. Some of these added features are its light weight,
small size, remote sensing ability, and suppression of 20 Hz
ringing and radio stations’signals.

Features
• Gives advance warning on extremely hazardous voltages
• Senses voltages without contacting the source electrically
• Indicates voltage both visually and audibly
• Suppresses 20Hz ringing and radio stations’
   signals with built-in filters
• Housed in non-conductive material
• Exceeds dielectric strength tests for greater than 20 KV
• Allows tests parameters to be factory adjusted
• UL listed to U.S. and Canadian safety standards
• Made in U.S.A.
Technical
Range 0 to 200 Vrms
Sensing Type Remote, AC only
Frequency 50 to 150 Hz
Display 10 step LEDbar graph, Log response
Audible Warning
Frequency 2800+300 Hz
Level Approximately 75 dba@1 foot
Threshold > 50 Vrms sensed voltage
Size 1.7” X.9”x7.8”
Weight 4.8 ounces
Battery
Type One (1) NEDA 1604A 9 Volt Alkaline,
or equivalent
Life > 9 hours continuous when idle
(bar graph LED not activated)
Environmental
Operating -20°C to 50°C at 10% to 95% RH,
non-condensing
Storage -40°C to 85°C at 0 to 100% RH,
non-condensing
Shock &
Vibration TR-EOP-000063 Compliant Ordering Information
Model FVD Foreign Voltage Detector